It been awhile since my last post. Lots of thing have happened. Lisa surgery and recovery has taken up a lot of time. We went to Pensacola, Fla just for something to do. It got Lisa moving again and she could see the end of the tunnel so to speak.
I would get a little done on the boat here and there. Every project turn in to not a can or worms but a bucket full. Got the new bimini up and the solar panels working. The little Yanmar wasn't pumping water. Can't run the motor without water. Well after changing the impeller and flushing the system she still wouldn't pump water. I found the ball valve broken and wouldn't open. I ended up connecting the sink drain out let. Funny thing that ball valve is broken in the open position. Well now I've got plenty of water running through the motor and she is purring like a kitten.
I did have to drain the 5 gallons of fuel out of the tank, installed two fuel filter and new fuel bulb. Sure hope I don't have to overhaul the motor anytime soon.
I have an appointment Monday so maybe early next week we can shove off for a few day. That would be nice. I am going to borrow a friends outboard just in case. I'll post photos if we go.
The sailing adventures of David, Lisa and Trixie on Miss Sadie. Miss Sadie is a 27' Watkins sailboat.
Saturday, July 13, 2013
Thursday, May 9, 2013
Big delay
Well the boat and cruising is on hold.
It has taken sometime for me to qualify for ChampVA through the Dept of Veterans Affairs. For those that don't know what ChampVA is it medical coverage for the spouse of a 100% disable veteran. The spouse can use it like medicaid or if there is a VA hospital in your area that will take ChampVA all medical and meds are free.
Lisa is signed up and here is the rest of the story.
Lisa has been in much pain and has lost most of her ability to walk. After a couple of appointments here is what the VA is going to do.
Quote for Lisa's facebook.
Well Monday they are going to screw my head back on. Tuesday I had a CT scan and a MRI. On the way home got a call to return to ER. 3 hours at the ER and back in the morning to meet with Neuro Surgeon. He told us that if I don't have the surgery by the time I turned 55 (I'm 54) I would be living the rest of my life in a wheel chair. There is a risk but well worth the chance. They will remove bone in my spine at the base of my neck re aline everything and screw me back together. I'll have to turn my body to turn my head. Not sure how long I'll be in the VA hospital or the recovery time. Only thing I'm worried about is them screwing my head on backwards.
End quote.
I got a call today that the VA will furnish us a motel Sunday night as her surgery is at 0600 Monday. They also said if she is in a private room I could stay with her if not then they are trying to get me in a room at the Fisher House.
The VA in San Antonio would have never done this for us. It took 18 months from them to find my cancer and Houston two weeks to find out what was wrong with Lisa. We are treated so nice in Houston that it is a shock compared to San Antonio.
Boating will be off for a while but we still plan to be at BEER even if Lisa has to use her walker or a wheel chair.
It has taken sometime for me to qualify for ChampVA through the Dept of Veterans Affairs. For those that don't know what ChampVA is it medical coverage for the spouse of a 100% disable veteran. The spouse can use it like medicaid or if there is a VA hospital in your area that will take ChampVA all medical and meds are free.
Lisa is signed up and here is the rest of the story.
Lisa has been in much pain and has lost most of her ability to walk. After a couple of appointments here is what the VA is going to do.
Quote for Lisa's facebook.
Well Monday they are going to screw my head back on. Tuesday I had a CT scan and a MRI. On the way home got a call to return to ER. 3 hours at the ER and back in the morning to meet with Neuro Surgeon. He told us that if I don't have the surgery by the time I turned 55 (I'm 54) I would be living the rest of my life in a wheel chair. There is a risk but well worth the chance. They will remove bone in my spine at the base of my neck re aline everything and screw me back together. I'll have to turn my body to turn my head. Not sure how long I'll be in the VA hospital or the recovery time. Only thing I'm worried about is them screwing my head on backwards.
End quote.
I got a call today that the VA will furnish us a motel Sunday night as her surgery is at 0600 Monday. They also said if she is in a private room I could stay with her if not then they are trying to get me in a room at the Fisher House.
The VA in San Antonio would have never done this for us. It took 18 months from them to find my cancer and Houston two weeks to find out what was wrong with Lisa. We are treated so nice in Houston that it is a shock compared to San Antonio.
Boating will be off for a while but we still plan to be at BEER even if Lisa has to use her walker or a wheel chair.
Saturday, April 20, 2013
Engine work
For more reasons than I can count I finally got back to the boat today to get a little work done. Got the starter installed and working. The exhaust elbow was next. Went by NAPA about a gasket, they didn't have one. Hope I don't need a new one.
With the starter in place and the elbow in its place it was time to see if the motor would turn over. Sure enough I could push the starter button and it would turn over. Now to drain the fuel tank and put in fresh fuel before I get her running again. I need that 20 gallon tank.
Tomorrow I'll get one of my dock mate sons to help me put back on the ladder and outboard motor bracket. Not going to give up the bracket. No sure if I can trust the Yanmar. We'll also get the anchor deck plate removed so I can epoxy it closed and re drill to fit the smaller deck plate. While at it I'll fill in a bunch of holes with epoxy that are no longer needed.
Still varnishing wood items that will go back on the boat and some new one. Pictures soon.
With the starter in place and the elbow in its place it was time to see if the motor would turn over. Sure enough I could push the starter button and it would turn over. Now to drain the fuel tank and put in fresh fuel before I get her running again. I need that 20 gallon tank.
Tomorrow I'll get one of my dock mate sons to help me put back on the ladder and outboard motor bracket. Not going to give up the bracket. No sure if I can trust the Yanmar. We'll also get the anchor deck plate removed so I can epoxy it closed and re drill to fit the smaller deck plate. While at it I'll fill in a bunch of holes with epoxy that are no longer needed.
Still varnishing wood items that will go back on the boat and some new one. Pictures soon.
Tuesday, April 16, 2013
Work continues
As the work continues I am working on the cockpit. Sand and sand and more sanding. The paint is like a latex on top or oil. It's just flaking of in little pieces.
Here is a photo of what's been done so far. OK doesn't look like much. Getting to the boat has been a problem at time. This week I have appointments for 3 days and need to take Lisa to the VA Thursday in Houston.
I've got the semi gloss deck paint at West Marine. Maybe this weekend for the first round.
I'm going to add a older photo of me that was taken up in Montana. Someone special to me has never seen me with a beard and the way I use to look.
The lady in my arm is my beautiful daughter. She came up to Montana to visit.
Here is a photo of what's been done so far. OK doesn't look like much. Getting to the boat has been a problem at time. This week I have appointments for 3 days and need to take Lisa to the VA Thursday in Houston.
I've got the semi gloss deck paint at West Marine. Maybe this weekend for the first round.
I'm going to add a older photo of me that was taken up in Montana. Someone special to me has never seen me with a beard and the way I use to look.
The lady in my arm is my beautiful daughter. She came up to Montana to visit.
Sunday, April 7, 2013
Recommission
Lisa and I went to the boat today to do one main thing. That is to recommission our Watkins 27. She had a french name Your lucky day and before that Ladyfingers. Well I think we gave her a name that means something. Miss Sadie Sadie was Lisa's grandmothers name. We put her name on the stern and also port of call.
Leave it to me to not get her name on straight. Little up hill run.
Next project was to get the addition plug in working for my navigation equipment. That done next was the starter. Got it pulled off cleaned up and ready to have it check then off to the shop on Monday.
It was a good day. She is starting to look like a boat that is loved. Got to get the cockpit painted.
Leave it to me to not get her name on straight. Little up hill run.
Next project was to get the addition plug in working for my navigation equipment. That done next was the starter. Got it pulled off cleaned up and ready to have it check then off to the shop on Monday.
It was a good day. She is starting to look like a boat that is loved. Got to get the cockpit painted.
Saturday, April 6, 2013
New Cushions
We got our new cushions today. They look pretty good. But not as good as Lisa could have made them. She is not able to sew at this time.
Spent most of the day working on the electrical. There is wire that run nowhere. Lots of to do on a neglected boat. Hope to put her name on tomorrow.
Our draw in the galley was in pretty bad shape so Charlie offered to rebuild it. He got it done today and on the boat. We still have to stain and varnish the front. Forgot to take a photo today. So will have to do it tomorrow.
Spent most of the day working on the electrical. There is wire that run nowhere. Lots of to do on a neglected boat. Hope to put her name on tomorrow.
Our draw in the galley was in pretty bad shape so Charlie offered to rebuild it. He got it done today and on the boat. We still have to stain and varnish the front. Forgot to take a photo today. So will have to do it tomorrow.
Tuesday, April 2, 2013
Photo up date
Spent the day working on the boat. Got Miss Froggy all clean out of our personal gear. Work on getting the bolts loose on the exhaust elbow. That is going to take a couple of day with PB Blaster and a few hits with a 4 lb hammer to break them loose.
Got the second coat of paint on the stern. Pretty shiny can see the letters from the dinghy on her. I'll put her new name on in a couple of day. Need to let the paint totally dry.
Photos of the cabin after all the glue is up.
I've still got to do some more sanding the put on a coat of non skid. Think I'll go with a light gray so it wont show the dirt so much.
I didn't take a picture of the draw that needs to be rebuilt. Charlie took it home to repair it for us.
Next major project will be the cockpit sole. Will sand it big time then put a good coat of light gray non skid on the sole. Should be able to do this one in a good weather day.
Got the second coat of paint on the stern. Pretty shiny can see the letters from the dinghy on her. I'll put her new name on in a couple of day. Need to let the paint totally dry.
Photos of the cabin after all the glue is up.
I've still got to do some more sanding the put on a coat of non skid. Think I'll go with a light gray so it wont show the dirt so much.
I didn't take a picture of the draw that needs to be rebuilt. Charlie took it home to repair it for us.
Next major project will be the cockpit sole. Will sand it big time then put a good coat of light gray non skid on the sole. Should be able to do this one in a good weather day.
Subscribe to:
Posts (Atom)

